Skip to main content
⚠ E-14 Medium Severity Samsung Wall Oven

Samsung Wall Oven E-14 Error Code: What It Means & How to Fix It

Authoritative diagnosis guide — causes, step-by-step troubleshooting, and when to call a certified Samsung technician.

Certified Samsung Technicians
Same-Day Appointments
OEM Parts Only
30-Day Parts & Labor Warranty

Error Code Explained

What Does the Samsung E-14 Error Code Mean?

The E-14 error code on a Samsung wall oven indicates a fault with a secondary oven temperature sensor. Some Samsung wall oven models — particularly double wall ovens — use a secondary temperature sensor in addition to the primary probe. E-14 is triggered when this secondary sensor reads outside the valid resistance range. On double wall oven models, E-14 may specifically identify the upper cavity sensor.

Root Causes

Common Causes of the Samsung E-14 Error Code

  • 1
    Failed Secondary Sensor
    The sensor probe has developed an open or short circuit.
  • 2
    Wiring Fault
    A break or corroded connector in the secondary sensor wiring harness.
  • 3
    Control Board Input Fault
    The sensor input circuit on the control board has failed.

Step-by-Step Guide

How to Troubleshoot the E-14 Error Code

⚠️

Safety First: Always disconnect the Wall Oven from power before inspecting any internal components. Do not attempt electrical repairs. If in doubt, call a certified technician.

  1. 1
    Power reset
    Turn off the circuit breaker for 60 seconds. A transient reading error may clear.
  2. 2
    Test sensor resistance
    With power off, locate the secondary sensor and test resistance. At room temperature (~70°F), a healthy Samsung sensor reads approximately 1,080 ohms.

Professional Service

When to Call a Samsung Technician

⚠ Stop DIY if any of these apply

Secondary sensor replacement requires identifying the correct sensor location for your model and accessing the rear of the oven cavity. A technician can confirm which sensor is affected and complete the repair.

Estimated Repair Cost
$95 – $260
Exact quote before any work begins. No surprises.
📞 844-739-1647

FAQ

Frequently Asked Questions — Samsung E-14

  • Typically only the cavity associated with the secondary sensor is affected. The primary cavity (with the E-11 sensor) may continue to operate normally while E-14 is active.

Book a Samsung Wall Oven Repair Appointment

Samsung specialist available same-day. We'll call within 60 minutes to confirm.

  • Free Diagnosis Estimate
  • 30-Day Warranty
  • No Hidden Fees
  • Same-Day Service Available

Your information is secure. We never share or sell your data.

844-739-1647