Samsung E-14 Error Code — Oven / Range Fault Fix

Error Code Explained

What Does the Samsung E-14 Error Code Mean?

The E-14 error code on a Samsung range indicates a fault with a secondary oven temperature sensor. In addition to the primary oven temperature probe (monitored by E-11), some Samsung range models use a secondary sensor to verify oven temperature or to monitor a specific zone. E-14 is triggered when this secondary sensor reads outside the acceptable resistance range.

On dual-oven models and ranges with upper and lower heating zones, E-14 identifies the secondary cavity sensor rather than the primary probe.

Root Causes

Common Causes of the Samsung E-14 Error Code

1

Failed Secondary Temperature Sensor

The sensor probe has developed an open or short circuit.
2

Wiring Fault to Secondary Sensor

The wiring harness to the secondary sensor has a break or corroded connector.
3

Control Board Sensor Input Fault

The secondary sensor input circuit on the control board has failed.

Step-by-Step Guide

How to Troubleshoot the E-14 Error Code

⚠️

Safety First: Always disconnect the Oven / Range from power before inspecting any internal components. Do not attempt electrical repairs. If in doubt, call a certified technician.

1

Power reset

Turn off the circuit breaker for 60 seconds. A transient sensor reading fault may clear.
2

Test secondary sensor resistance

With power off, locate and disconnect the secondary sensor. At room temperature, test resistance across the sensor terminals. A healthy Samsung temperature sensor reads approximately 1,080 ohms. Infinite or near-zero confirms sensor failure.

Professional Service

When to Call a Samsung Technician

⚠ Stop DIY if any of these apply

Secondary sensor replacement requires identifying the sensor's location (varies by model) and accessing it through the oven cavity or rear panel. A technician can locate and replace the correct sensor.

Estimated Repair Cost

$90 – $250

Exact quote before any work begins. No surprises.

📞 844-739-1647

FAQ

Frequently Asked Questions — Samsung E-14

E-11 involves the primary oven temperature sensor — the main probe used for all baking and broiling temperature control. E-14 involves a secondary sensor used for verification or zone monitoring. Both require sensor testing and possible replacement.

Book a Samsung Oven / Range Repair Appointment

Samsung specialist available same-day. We'll call within 60 minutes to confirm.

Free Diagnosis Estimate
30-Day Warranty
No Hidden Fees
Same-Day Service Available

Your information is secure. We never share or sell your data.