Error Code Explained
What Does the Samsung bE Error Code Mean?
The bE error code on a Samsung dishwasher indicates a control panel button fault — a key is stuck in the pressed position or the membrane switch is shorted. The control board cannot accept commands when a button appears permanently active, so the dishwasher halts and displays bE.
Root Causes
Common Causes of the Samsung bE Error Code
-
1Debris or Moisture Under the PanelFood splatter or moisture has worked under the control panel membrane, physically holding a button or creating a short.
-
2Damaged Membrane SwitchThe flexible membrane switch has developed a crack at a button location, creating a permanent contact.
-
3Control Board Key-Scan FaultThe control board's button scanning circuit has failed.
Step-by-Step Guide
How to Troubleshoot the bE Error Code
Safety First: Always disconnect the Dishwasher from power before inspecting any internal components. Do not attempt electrical repairs. If in doubt, call a certified technician.
-
1Clean the control panelWipe the entire control panel with a slightly damp cloth, pressing each button and releasing. Dry thoroughly with a soft cloth. Clean around all button edges.
-
2Power resetTurn off the dishwasher at the circuit breaker for 10 minutes. Moisture-induced shorts may clear as the panel dries.
Professional Service
When to Call a Samsung Technician
If bE persists, the control panel assembly or main PCB requires replacement.
FAQ
Frequently Asked Questions — Samsung bE
-
Keep the control panel dry — avoid spraying water directly at it when cleaning the dishwasher exterior, and ensure the door seal is in good condition to prevent steam from reaching the panel.
Book a Samsung Dishwasher Repair Appointment
Samsung specialist available same-day. We'll call within 60 minutes to confirm.
- Free Diagnosis Estimate
- 30-Day Warranty
- No Hidden Fees
- Same-Day Service Available
Your information is secure. We never share or sell your data.